29
GB
D:\NORM'S JOB\SONY HA\SO17_STR-DH590_PMRF1\STR-DH590 (PMRF
01)\4726906121_GB\040CON.fm
masterpage: Right
STR-DH590
4-726-906-12(1)
Connection and Preparation
7: Setting for HDMI
Perform this setting when the receiver is
connected to a TV or audio-visual devices
using an HDMI cable.
If the receiver is connected to a TV’s HDMI
input jack that is compatible with the Audio
Return Channel (ARC) function (page 19,
21), turn on the Control for HDMI function.
Press AMP MENU, then press
/ and to select
“<HDMI>” – “CTRL.HDMI” – “CTRL
ON”.
The Audio Return Channel (ARC) function
will be activated and the TV sound will be
output to the receiver.
Be sure to set the Control for HDMI function of
your TV to on. For details, refer to the operating
instructions of the TV.
• To return to the previous menu, press BACK.
• To exit the menu, press AMP MENU.
Select the appropriate setting for the
connected TV and audio-visual devices.
1 Press AMP MENU, then press
/ and to select
“<HDMI>” – “SIG. FMT.”.
2 Press / to select the input
you want, and then press .
3 Press / to select the
setting fit to the video signal
format of the connected TV
and/or audio-visual device,
and then press .
“STANDARD”: Select this when you do
not use high bandwidth video format.
“ENHANCED”: Select this when you
use high bandwidth video formats
such as 4K/60p 4:4:4, 4:2:2 and
4K/60p 4:2:0 10 bit.
For details on the video format, visit the
Help Guide.
• Depending on the TV or the video device, 4K
content and/or 3D content may not be
displayed.
• For details on the connected device, refer to the
operating instructions of the device.
• If your TV have similar menu for high bandwidth
video format, check the setting on the TV menu
when you select “ENHANCED” on this receiver.
For details on the TV menu setting, refer to the
operating instructions of the TV.
Activating the Audio Return
Channel (ARC) function
Note
Tip
Setting the HDMI Signal Format
Note
To Next Page
Loading...
Need help?
General
Weight and Dimensions
