EasyManuals Logo

Sony STR-DN610 User Manual

Sony STR-DN610
84 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #65 background imageLoading...
Page #65 background image
65
GB
D:\NORM'S JOB\SONY HA\SO0086\STR-DN610_PMRF 2\GB\GB08ADV_STR-DN610-U2.fm masterpage: Right
STR-DN610
4-167-824-13(1)
Advanced Operations
x SB ASGN
SPK B
If you connect an additional front speaker
system to the SPEAKERS SURROUND
BACK/BI-AMP/FRONT B terminals, select
“SPK B”.
BI-AMP
If you connect front speakers to the
SPEAKERS SURROUND BACK/
BI-AMP/FRONT B terminals using a
bi-amplifier connection, select “BI-AMP”.
•OFF
If you connect surround back speakers to the
SPEAKERS SURROUND BACK/
BI-AMP/FRONT B terminals, select “OFF”.
Note
When you change the connection from bi-amplifier
or speaker front B to surround back speakers
connection, set “SB ASGN” to “OFF”, then perform
the Auto Calibration again (page 33).
x FL DIST.
x FR DIST.
Lets you set the distance from your listening
position to the front speakers.
If both front speakers are not placed an equal
distance from your listening position, set the
distance to the closest speaker.
x CNT DIST.
Lets you set the distance from your listening
position to the center speaker.
x SL DIST.
x SR DIST.
Lets you set the distance from your listening
position to the surround speakers.
x SB DIST.
x SBL DIST.
x SBR DIST.
Lets you set the distance from your listening
position to the surround back speakers.
x SW DIST.
Lets you set the distance from your listening
position to the subwoofer.
Notes
Depends on the speaker pattern setting. Some
parameters may not be available.
These parameters do not work in the following
cases:
signals with a sampling frequency of more than
48 kHz are being received.
the multi channel Linear PCM signals are
received via an HDMI IN jack.
Analog Direct is selected.
x DIST.UNIT
Lets you select the unit of measure for setting
distances.
METER
The distance is displayed in meters.
FEET
The distance is displayed in feet.
x FRT CRS.
Lets you set the bass crossover frequency of
the front speakers that have been set to
“SMALL” in the SPEAKER menu.
x CNT CRS.
Lets you set the bass crossover frequency of
the center speaker that have been set to
“SMALL” in the SPEAKER menu.
x SUR CRS.
Lets you set the bass crossover frequency of
the surround speakers that have been set to
“SMALL” in the SPEAKER menu.

Table of Contents

Other manuals for Sony STR-DN610

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Sony STR-DN610 and is the answer not in the manual?

Sony STR-DN610 Specifications

General IconGeneral
AirPlayNo
DisplayVFL
EqualizerYes
Product colorBlack
Audio decodersDolby Digital, Dolby Digital EX, Dolby Pro Logic, Dolby Pro Logic II, Dolby Pro Logic IIx, DTS, DTS 96/24, DTS Neo:6, DTS-ES (Discrete 6.1), DTS-ES (Matrix 6.1)
Apple docking compatibilityNot supported
Impedance8 Ω
Receiver typeSurround
Audio output channels7.1 channels
Total Harmonic Distortion (THD)1 %
Power output per channel (20-20KHz@8 Ohm)100 W
Supported radio bandsAM, FM
Digital audio optical in1
Component video (YPbPr/YCbCr) in3
Connectivity technologyWired
Speakers connectivity type-
Headphone connectivity3.5 mm
Weight and Dimensions IconWeight and Dimensions
Depth324.5 mm
Width430 mm
Height157.5 mm

Related product manuals