15
GB
Using the hidden commands
Using the hidden commands
Performing commands using the receiver
This receiver allows you to perform various commands using buttons on the front panel.
PING ENTER
AMP
MENU
2CH/
A.DIRECT
MULTI ST.
Function Operation
User initialize (Memory Clear)
Hold for 5seconds in standby mode.
Sound Field Clear
Hold down MULTI.ST. and press in standby mode.
Settings Lock Hold down PING and AMP MENU and press ENTER while the
receiver is turned on.
Command mode
Hold down 2CH/A.DIRECT and press in standby mode.
To Next Page
Loading...
Need help?
General
