9
GB
Connections & settings (multi room/single room)
Linking with a Hi-Fi music system
This receiver can switch its power and input automatically by linking with playback operation
of the Hi-Fi music system.
Configure settings to enable the receiver to operate linked with a Hi-Fi System device.
1 Select [Setup] - [Network Setup] - [Music Connect] from the home.
2 Select the setting you want.
Connected Device: Select the connected device to enable the function.
Input for Music Connect: Select the input to link with.
3 Start playback on the player device.
The receiver will be turned on and the input switched automatically.
To disable Music Connect
Select [Setup] - [Network Setup] - [Music Connect] - [Connected Device] - [Remove Connected
Device] from the home menu.
Notes
•The Music Connect feature can be linked only with the power source and input of the main zone. This
feature does not link with zone 2 or zone 3.
•The link feature of Music Connect may not work correctly depending on factors such as the
specifications of the connected device.
•We recommend that you set [Network Standby] to [On] to activate the feature for linking with Music
Connect even if the receiver is in standby mode.
•Only one Hi-Fi music system device can be linked with the receiver at a time using the Music Connect
feature.
To Next Page
Loading...
Need help?
General
