VRD-MC1
2-661-941-02 (1)
masterpage:Right
17
G:\#sagyou\Sony\01 TV\836599S VRD-MC1\0119 VRD-MC1i\0119 VRD-MC1 kai nou-
hin\2661941011\2661941011\2661941011 VRD-MC1\GB05OPE1.fm
Using DVDirect without a Computer
One Touch Recording (DV Full Dubbing)
Note
Before you start recording, change the [DV Full Dubbing setting] to [ON] in the Setup menu.
( page 33)
1 Connect the supplied power cord and AC adaptor to DVDirect.
2 Connect your digital video camera* to DVDirect with a DV
(i.LINK) cable (not supplied).
* DV or Digital8 camcorder only. MICROMV camcorder is not supported.
3 Turn on the digital video camera and ready it for playback.
Hint
For most digital video cameras, switch the power/mode button to the playback or “VTR”
mode to play the tape or perform dubbing.
4 Set the mode switch on the left side of DVDirect to
[STANDALONE].
DV IN
DV (i.LINK) cable
Signal flow
STANDALONE PC/PRINT
. Continued
GB01COV1.book Page 17 Thursday, January 19, 2006 7:25 PM
To Next Page
Loading...
Need help?
General
