Sony WF-1000XM3 Series User Manual

WF-1000XM3
21
Sony CONFIDENTIAL
For Authorized Servicer
2-4. INDICATOR LED
1 Peel the indicator LED off of
the adhesive sheet NFC.
boss
hole
3 indicator LED
Note:
When installing the indicator LED,
align the two bosses and two holes.
hole
boss
hole
2 Draw the indicator
LED out of the hole.
adhesive sheet NFC
(adhesive portion)
rear side
top side
2-5. CASE NFC BOARD
1
Lift up the CASE NFC board
in the direction of the arrow.
3 Draw the
CASE NFC board
out of the slot.
4
CASE NFC board
front side
top side
bottom side
slot
slot
hole
hole
adhesive sheet NFC
(adhesive portion)
case inner block
2 Peel the
CASE NFC board
off of the case inner block.
CASE NFC board
SYSSET
2020/04/0306:12:21(GMT+09:00)

Sony WF-1000XM3 Series Specifications

General

Type	True Wireless
Bluetooth Version	5.0
Driver Unit	6mm
Charging Time (Earbuds)	Approx. 1.5 hours
Charging Time (Charging Case)	Approx. 3.5 hours
Quick Charging	10 min charge for 90 min playback
Weight (Charging Case)	Approx. 77g
Touch Controls	Yes
Frequency Response	20 Hz - 20, 000 Hz (44.1 kHz Sampling)
Bluetooth Profiles	A2DP, AVRCP, HFP, HSP
Audio Codec	SBC, AAC
Water Resistance	No
NFC	Yes
Microphone	Yes
Compatibility	Android, iOS
Noise Cancellation	Active Noise Cancellation
Battery Life (Earbuds)	Up to 6 hours
Battery Life (Charging Case)	Up to 24 hours (with ANC on), up to 32 hours (with ANC off)
Weight (Earbuds)	Approx. 8.5g each
Voice Assistant Support	Google Assistant, Amazon Alexa
Wireless Range	30 ft (10 m)