Help Guide
Wireless Noise Canceling Stereo Headset
WF-SP700N
Low sound quality
Turn down the volume if it is too loud.
Keep the headset away from microwave ovens, Wi-Fi devices, etc.
Bring the headset and the Bluetooth device closer together. Remove any obstacles between the headset and the
Bluetooth device.
Keep the headset away from a TV.
Switch the Bluetooth connection to A2DP by operating the Bluetooth device when HFP or HSP is set.
If you connect a device with a built-in radio or tuner to the headset, broadcasts may not be received, or sensitivity
may be reduced. Move the headset away from the connected device and try again.
If you have previously connected the headset to this Bluetooth device, only an HFP/HSP Bluetooth connection may
be made when the headset is turned on. If this happens, use the Bluetooth device and make an A2DP Bluetooth
connection.
4-730-308-11(4) Copyright 2018 Sony Corporation
To Next Page
Loading...
Need help?
General
