Help Guide
Wireless Stereo Headset
h.ear in 2 Wireless (WI-H700)
Pairing and connecting with a computer (Windows 10)
Pairing is the process required to create a link between BLUETOOTH devices to allow wireless connection. You must
pair a device with the headset to be able to make a BLUETOOTH connection for the first time.
Before you start pairing operation, make sure that:
Your computer has a BLUETOOTH function that supports music playback connections (A2DP).
The computer is placed within 1 m(3 feet) of the headset.
The headset is charged sufficiently.
The operating instructions of the computer is on hand.
Depending on the computer, the built-in BLUETOOTH adaptor should be turned on. For whether or not a
BLUETOOTH adaptor is incorporate, and for how to turn it on, refer to the operating instructions supplied with the
computer.
Enter pairing mode on this headset.
Turn on the headset, when you pair the headset with a device for the first time after you bought it, or after you
initialized the headset (the headset has no pairing information). The headset enters pairing mode automatically.
When you pair a 2nd or subsequent device (the headset has pairing information for other devices), press and hold
the
button for about 7 seconds.
Make sure that the indicator flashes blue and red alternately after you release the button. You hear voice guidance
“BLUETOOTH pairing”.
1
Resume the computer from sleep mode.
2
Register the headset using the computer.
3
Click the [Start] button, then [Settings].
1.
Click [Devices].
2.
To Next Page
Loading...
Need help?
General
