Help Guide
Wireless Stereo Headset
h.ear in 2 Wireless (WI-H700)
Controlling the audio device (BLUETOOTH connection)
If the BLUETOOTH device supports AVRCP, you can control it by the headset. The functions available may vary
depending on the BLUETOOTH device. Refer to the operating instructions supplied with your BLUETOOTH device.
Each button has the following function:
Press once during pause to start playback.
Press once during playback to pause.
Press twice to skip to the beginning of the next track (
).
Press three times to skip to the beginning of the previous (or current) track (
).
Press once and release, and then press and hold to fast-forward (
).
Press twice and release, and then press and hold to fast-reverse (
).
+/-
Press to adjust the volume.
Note
If the communication condition is poor, the BLUETOOTH device may react incorrectly to the operation on the headset.
The available functions may vary depending on the BLUETOOTH device. When you operate as illustrated above, it may operate
differently or may not work at all.
4-698-993-11(2) Copyright 2017 Sony Corporation
To Next Page
Loading...
Need help?
General
