Help Guide
Wireless Stereo Headset
h.ear in 2 Wireless (WI-H700)
Connecting to a paired computer (Windows 8/Windows 8.1)
Before starting the operation, make sure the following:
Depending on the computer, the built-in BLUETOOTH adaptor should be turned on. For whether or not a
BLUETOOTH adaptor is incorporate, and for how to turn it on, refer to the operating instructions supplied with the
computer.
Resume the computer from sleep mode.
1
Turn on the headset.
Press and hold the
button for about 2 seconds.
Make sure that the indicator (blue) flashes after you release the button. You hear voice guidance “Power on”.
After the headset turns on, if it has automatically connected to the last connected device, you hear voice guidance
“BLUETOOTH connected”.
Use the computer to check whether the connection is established, and if it is not established, proceed to step 3.
If the computer has connected to the last BLUETOOTH device connected, disconnect it, then proceed to the next
step.
2
Select the headset using the computer.
3
Select [Desktop] on the Start screen.
1.
Move the mouse pointer to the top-right corner of the screen (when using a touch panel, swipe from the right
edge of the screen), then select [Settings] from the Charm Bar.
2.
To Next Page
Loading...
Need help?
General
