53
General settings
Touch c “General” c the desired item c the desired option. For details on this procedure, see
“Basic setting operation” on page 52.
For details, see the pages listed below. “z” indicates the default setting.
Item Option Purpose Unit status
Security Control (page 60)
–
–Any status
Clock Adjust (page 60)
–
–Any status
Auto OFF
Shuts off automatically after a
desired time when no source is
selected.
No (z)
To deactivate the Auto Off
function.
Any status
30sec, 30min,
60min
To select the desired time.
CT (Clock Time) (page 20, 21)
ON
To activate the CT function.
Any status
OFF (z)
To deactivate the CT
function.
Output Color System
Changes the color system
according to the connected
monitor.
(SECAM is not supported.)
PAL
To set to PAL.
No source
selected
NTSC (z)
To set to NTSC.
Dimmer
Changes the display
brightness.
Auto (z)
To dim the display
automatically when you
turn lights on. (Available
only when the illumination
control lead is connected.)
Any status
ON
To dim the display.
Dimmer Level
Sets the brightness level when
the dimmer is activated.
(–5 ~ +5)
z: 0
To select the level.
Any status
Touch Panel Adjust
(page 50)
–
–
Any status
Beep
ON (z)
To activate the operation
sound.
Any status
OFF
To deactivate the operation
sound.
Language
English (z),
Español,
Русский
To select the display
language.
No source
selected
Key Illumination
ON (z)
To turn on the button
illumination.
Any status
OFF
To turn off the button
illumination.
continue to next page t
To Next Page
Loading...
Need help?
General
