Help Guide
Wireless Noise Canceling Stereo Headset
WF-1000XM4
The effect of noise canceling is not sufficient.
Make sure that the noise canceling function is turned on.
If the size of the earbud tips does not match the size of your ear canals or the headset is not properly worn on your
ears, tap operations or the speech detection of Speak-to-Chat may not be successful, or you may not obtain proper
sound qualities, noise canceling effects, or call performances.
If any of this is the case, try the following.
Change the earbud tips to ones that fit more snugly in your ears. When changing the earbud tips, try the earbud
tip sizes in order from the larger ones to the smaller ones. The size of the left and right earbud tips may be
different.
The “Sony | Headphones Connect” app will help you to determine which earbud tips are most suitable for you to
achieve the optimal noise cancellation effect.
Check if the headset is properly worn on your ears. Wear the headset so that the earbud tip is comfortably
situated as deep in the ear canal as possible.
The noise canceling function is effective in low frequency ranges such as airplanes, trains, offices, near air-
conditioning, and is not as effective for higher frequencies, such as human voices.
When the Adaptive Sound Control on the “Sony | Headphones Connect” app is turned on, the wearer's actions, like
walking or running, are detected. The noise canceling function is automatically adjusted and the Ambient Sound
Mode may be activated according to these actions.
To make the most of the noise canceling function, turn off the Adaptive Sound Control, and try to turn on the noise
canceling function manually when you need it.
Related Topic
Replacing the earbud tips
Wearing the headset
What is noise canceling?
Using the noise canceling function
What you can do with the “Sony | Headphones Connect” app
5-027-983-11(1)
Copyright 2021 Sony Corporation
To Next Page
Loading...
Need help?
General
