To Next Page

To Previous Page

Help Guide

Wireless Noise Canceling Stereo Headset

WF-1000XM4

Pairing cannot be done.

Bring the headset and the Bluetooth device within 1 m (3 feet) from each other.

When pairing for the first time after purchasing, initializing, or repairing the headset, the headset enters pairing mode

automatically if you remove the headset from the charging case. When you pair a second or subsequent device, put

the headset units into both ears, then hold your fingers to the touch sensors on both the left and right units at the

same time for about 5 seconds to enter pairing mode.

When pairing a device once again after initializing or repairing the headset, you may be unable to pair the device if it

retains pairing information for the headset (iPhone or other device). In this case, delete the pairing information for the

headset from the device and pair them again.

Restart the connected device such as a smartphone or a computer you use, and pair the headset and the device

again.

Reset the headset.

Initialize the headset, and pair the headset and the device again.

Sony YY2948 User Manual

Other manuals for Sony YY2948