About the instruction manual video
Watch the video to find out how to register a device (pairing) for the first time.
https://rd1.sony.net/help/mdr/mov0022/h_zz/
Hint
The operation above is an example. For more details, refer to the operating instructions supplied with the Android smartphone.
To delete all Bluetooth pairing information, see “Initializing the headset to restore factory settings”.
Note
If pairing is not established within 5 minutes, pairing mode is canceled. In this case, set the headset into the charging case, and
start the operation again from step 1.
Unlock the screen of the Android smartphone if it is locked.
3
Find the headset on the Android smartphone.
4
Select [Settings] - [Device connection] - [Bluetooth].
1.
Touch the switch to turn on the Bluetooth function.
2.
Touch [WF-1000XM4].
If Passkey (*) input is required, input “0000”.
The headset and smartphone are paired and connected with each other.
You will hear the voice guidance say, “Bluetooth connected”, from both headset units.
If they are not connected, see “Connecting to a paired Android smartphone”.
If [WF-1000XM4] does not appear on the Android smartphone screen, try again from the beginning of step 4.
5
A Passkey may be called “Passcode”, “PIN code”, “PIN number”, or “Password”.
*
To Next Page
Loading...
Need help?
General
