About the instruction manual video
Watch the video to find out how to register a device (pairing) for the first time.
https://rd1.sony.net/help/mdr/mov0022/h_zz/
Hint
The operation above is an example. For more details, refer to the operating instructions supplied with your iPhone.
To delete all Bluetooth pairing information, see “Initializing the headset to restore factory settings”.
Note
Unlock the screen of the iPhone if it is locked.
3
Find the headset on the iPhone.
4
Select [Settings].
1.
Touch [Bluetooth].
2.
Touch the switch to turn on the Bluetooth function.
3.
Touch [WF-1000XM4].
If Passkey (*) input is required, input “0000”.
The headset and iPhone are paired and connected with each other.
You will hear the voice guidance say, “Bluetooth connected”, from both headset units.
If they are not connected, see “Connecting to a paired iPhone
”.
If [WF-1000XM4] does not appear on the display of the iPhone, try again from the beginning of step 4.
5
A Passkey may be called “Passcode”, “PIN code”, “PIN number”, or “Password”.
*
To Next Page
Loading...
Need help?
General
