During call
You can use the touch sensor on either the left or right unit to perform the following operations.
When only one unit of the headset is worn on your ear, operate the headset on the unit that is worn.
Tap the touch sensor twice quickly to finish a call.
Hold your finger to the touch sensor for about 2 seconds to change the call device back and forth from the headset to
the smartphone/mobile phone.
Supported profile: HSP (Headset Profile)
You can use the touch sensor on either the left or right unit to perform the following operations.
When only one unit of the headset is worn on your ear, operate the headset on the unit that is worn.
Outgoing call
Tap the touch sensor twice quickly to cancel an outgoing call.
Incoming call
Tap the touch sensor twice quickly to answer a call.
During call
Tap the touch sensor twice quickly to finish a call.
Related Topic
Using only one unit of the headset
Receiving a call
Making a call
5-027-983-11(1)
Copyright 2021 Sony Corporation
To Next Page
Loading...
Need help?
General
