To Next Page

To Previous Page

Installing SoboPro

ATTENTION

Damage caused by rough handling.

The connection folds of the floor panels are sensitive to bumps

and crushing.

▶ Connect the floor panels carefully.

Step 1 — Preparing the vehicle

Note: If your vehicle has a floor cladding, it

needs to be removed.

▶ Remove the lashing eyes in the floor area.

Note: Keep the components of the lashing

eyes that have been removed for subsequent

re-assembly.

▶ Clean the vehicle floor.

Step 2 — Positioning the floor panels

▶ Check whether or not the floor panel folds

are damaged.

▶ Position the first floor panel.

Note: This is laid from the divider to the rear

of the vehicle.

▶ Position the next floor panel.

▶ Fit the floor panels together.

Note:

• The connecting ends must be flush.

• Make sure that the cut-outs line up with

each other.

▶ If available, position additional floor panels

one by one and connect to the previous ones.

Sortimo SR5 User Manual

Questions and Answers: