Introduction
The STM32H747I-EVAL and STM32H757I-EVAL Evaluation boards (STM32H7x7I-EVAL) are high-end development platforms
for the Arm
®
Cortex
®
-M7-based STM32H747XI and STM32H757XI microcontrollers (STM32H7x7XI), respectively. The
STM32H7x7I-EVAL Evaluation boards provide access to all the STM32 peripherals for user applications, and include an
embedded STLINK-V3E debugger/programmer.
The full range of the STM32H7x7I-EVAL hardware features helps develop applications and evaluate all peripherals: USB
OTG_HS and FS, Ethernet, FDCAN, USART, Audio DAC and ADC, digital microphone, SRAM, SDRAM, NOR Flash memory,
Twin Quad-SPI Flash memory, microSD
™
3.0 card, 4” 480×800 TFT color LCD with MIPI DSI
SM
interface and capacitive
touchpanel, and cryptographic hardware accelerator (available only on STM32H757XI devices) .
The expansion connectors provide an easy way to add specialized features, while ETM trace is supported through external
probes.
Figure 1. STM32H7x7I-EVAL board (top view)
Picture is not contractual.
Evaluation boards with STM32H747XI and STM32H757XI MCUs
UM2525
User manual
UM2525 - Rev 3 - May 2019
For further information contact your local STMicroelectronics sales office.
www.st.com
To Next Page
Need help?
General
