Product marking UM2243
8/41 UM2243 Rev 2
2 Product marking
Evaluation tools marked as ‘ES’ or ‘E’ are not yet qualified and are therefore not ready to be
used as reference designs or in production. Any consequences arising from such usage will
not be at ST's charge. In no event will ST be liable for any customer usage of these
engineering sample tools as reference designs or in production.
Example ‘E’ or ‘ES’ marking locations:
• On the targeted STM32 that is soldered on the board (for illustrations of STM32
marking, refer to the applicable STM32 datasheet at www.st.com).
• Next to the evaluation tool ordering part number. This is stuck to, or silkscreen printed
on the board.
This board features a specific STM32 device version which allows the operation of any
stack or library. This STM32 device shows a ‘U’ marking option at the end of the standard
part number and is not available for sales.
3 System requirements
• Windows
®
OS (XP, 7, 8, 10), Linux
®
64-bit or macOS
®
• USB Type-A to Micro-B cable
To Next Page
Loading...
Need help?
General
