www.stiebel-eltron.com DHEConnect | DHETouch | 65
OPERATION
Settings
4. Settings
4.1 Temperature settings
OFF 3s
38 60
+
_
D0000054549
1
2
3
4
Memor y 1 Memor y 2 Maximum
Weather Radio ECO
1 Buttons "-" and "+", press continuously for rapid update
2 Rapid selection of temperature with the memory keys
3 Touch-Wheel
4 Mini wireless remote control buttons
- Temperature selection 20 - 60°C in 0.5°C increments. From
43°C (risk of scalding) the temperature on the touchscreen
turns red
- "OFF" = heating system switched off
Dynamic anti-scalding protection
With the dynamic anti-scalding protection, after selecting a tem-
perature on the appliance or wireless remote control, the user has
automatic priority for maximum temperature setting. The priority
is active for 2minutes or until 2 minutes after the current draw-off
ends. After this, the priority is automatically disabled.
During the priority period, you can reduce the temperature or
increase it to a maximum of 43°C using other wireless controls.
Internal anti-scalding protection
If desired, your qualified contractor can set a permanent tem-
perature limit; forexample in nurseries, hospitals, and so on.
This prevents the flow of water at scalding temperatures from
the appliance.
4.2 Start screen
The start screen is divided into four areas where you can operate
DHE.
D0000059464
1
2
3
4
5
Memory 1
Weather
Memory 2
Radio
Maximum
ECO
1 Status display with active functions
2 Temperature, display and adjustment