WORKSHOP MANUAL
EDITION
PAGE
27 /
124
The removal of the rear hood is necessary
when removing the engine, muffler and tank and
makes work on the tank and the battery easier.
1. Open the hood (1).
3.1.1 Removing the rear hood ...............................................................27
3.1.2 Removal of the front casing of the belts ........................................28
3.1.3 Removal of the rear casings of the belts .......................................29
3.1.4 Removing the casings of the steering column ..............................31
3.1.5 Remove the cover under the seat .................................................33
3.1.6 Disassembly of the dashboard casing ..........................................33
3.2.1 Disassembly and reassembly of the articulated joint pulleys ........35
3.2.2 Separation of the two parts of the machine ...................................38
3.2.3 Replacement of the articulated joint bearings ...............................40
3.2.4 Replacement of the lifting device .................................................40
To Next Page
Loading...
Need help?
General
