WORKSHOP MANUAL
EDITION
PAGE
94 /
124
Draining the oil is facilitated if it is carried out before it cools down completely.
The oil must be drained with the by-pass
open and the cap of the oil tank unscrewed.
1. Place a container under the rear transmission
unit and drain all the oil by unscrewing the filter
cap.
Unscrew the two drain plugs (2) and (3).
2. Remove the filter (4) grabbing it by the spring
(5).
3. Let all the oil flow into the container.
4. Fit the new filter (6) pushing it fully into its
housing.
To Next Page
Loading...
Need help?
General
