3.4 MAIN COMPONENTS
A. Motor
B. Rod
C. Cutting means
designed to cut the vegetation
1. Cutting line head
2. 4-point blade
D. Cutting means guard
E. "MONO" front hand grip
F. "MONO" rear hand grip
G. Leg guard
H. Harness
I.
Blade protection
K. Battery
L. Battery charger
L1
L2
4. ASSEMBLY
IMPORTANT The safety regulations
to follow are described in chap. 2. Strictly
comply with these indications to avoid
serious risks or dangers.
Unpacking and completing the
assembly should be done on a at and
stable surface, with enough space for
machine handling and its packaging,
always making use of suitable equipment.
Do not use the machine until all the
indications provided in the “ASSEMBLY”
section have been carried out.
4.1 ASSEMBLY COMPONENTS
4.1.1 Unpacking
1.
2.
3.
4.
5.
Before assembling, make sure the
battery is not inserted in its housing.
4.2 HANDLE ASSEMBLY
4.2.1 Assembly of the front hand grip
1.
2.
3.
To Next Page
Loading...
Need help?
General
