EN - 10
4.3 FITTING/REMOVING CUTTING
MEANS AND SPECIFIC GUARDS
Wear protective gloves.
IMPORTANT When the cutting means has to
be changed, remove the battery from its housing
and dismantle all the elements of the device.
4.3.1 Selecting the cutting means
-
• the cutting line head
• the 4-point blade is suitable for cutting
tough grass over large surfaces.
4.3.2 Fitting the guard on the
cutting means
1.
2.
NOTE On the guard of the cutting
means there is the following symbol:
Indicates the rotation
direction of the
4.3.3 Fitting and removing cutting means
4.3.3.a Fitting cutting line head
1.
2.
IMPORTANT When using the cutting line
head, the line cutting knife must always be
installed (Fig. 8.A). The machine is delivered
with a cutting diameter set to 38 cm.
4.3.3.b Removing cutting line head
1.
2.
4.3.3.c Fitting 4-point blade
Apply the guard to the blade.
1.
2.
3.
engages in the hole in the inner ring
4.
5.
4.3.3.d Removing 4-point blade
Apply the guard to the blade.
1.
engages in the hole in the inner ring
2.
3.
To Next Page
Loading...
Need help?
General
