•
• set a cutting speed suitable for
•
•
•
7.2.2 Battery removal and recharging
1.
2.
3.
e
4.
NOTE The battery is equipped with a guard
that inhibits recharging if the environmental
temperature is not between 0 and +45 °C.
NOTE The battery can be recharged at any
time, even partially, with no risk of damaging it.
7.2.3
1.
2.
3.
7.3 CLEANING THE MACHINE
AND THE MOTOR
•
•
• Do not use aggressive detergents or solvents
to clean the plastic parts or hand grips.
•
•
•
7.4 NUTS AND BOLTS
•
•
8. OCCASIONAL MAINTENANCE
8.1 CUTTING MEANS MAINTENANCE
indicated on the Technical Data table
Do not touch the cutting means until
the battery has been removed and the
cutting means is completely stationary.
Warning! Risk of injuries due
to dangerous moving parts!
To Next Page
Loading...
Need help?
General
