EN - 14
6.6 STOP
1.
2.
3.
When you have stopped the
machine, it will take a few seconds
for the cutting means to stop.
IMPORTANT Always stop the machine
when moving between work areas.
Do not keep your nger on the safety
button when moving the machine to avoid
accidentally enabling the machine.
6.7 AFTER USE
•
and recharge it .
•
•
storing in an enclosed space.
•
•
the authorised service centre.
IMPORTANT Always remove the battery
(par 7.2.2) and t the glade guard whenever
you leave the machine unused or unattended.
7. ROUTINE MAINTENANCE
7.1 GENERAL INFORMATION
IMPORTANT The safety regulations
to follow are described in chap. 2. Strictly
comply with these indications to avoid
serious risks or dangers.
Prior to carrying out any
maintenance operation, you need to:
• stop the machine;
• remove the battery from its housing
and recharge it (par 7.2.2);
• when the cutting means is stationary,
apply the blade protection device, (except
when working directly on the blade);
• allow the motor to cool before
storing in an enclosed space;
• use suitable clothing, protective
gloves and goggles;
• read the relevant instructions.
help
The use of non-genuine spare parts and
Genuine spare parts are supplied
Centres and Dealers.
IMPORTANT Any maintenance and
adjustment operations not described in
this manual must be carried out by your
dealer or Authorised Service Centre.
7.2 BATTERY
7.2.1 Battery power reserve
cuttable vegetation area before recharging
a.
b.
technique that is unsuitable for the
cutting speed unsuitable for the
condition of the grass to be cut.
To Next Page
Loading...
Need help?
General
