EasyManuals Logo
Home>Stiga>Lawn Mower>G300

Stiga G300 User Manual

Stiga G300
150 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #12 background imageLoading...
Page #12 background image
6
EN
6. TROUBLESHOOTING
CAUTION:

Below there is the list of any anomalies that may arise during the work phase.
PROBLEM CAUSES SOLUTIONS
Abnormal vibrations. The robot lawn
mower is noisy.
Damaged cutting disc or blades Replace the damaged components (See Par. 4.2).
Cutting device blocked by residues (tapes, ropes,
plastic fragments, etc.).
Switch o the lawn mower robot in safety conditions (See
Par. 1.4). Unlock the cutting blade.
The robot lawn mower was started in the presence
of unexpected obstacles (fallen branches,
forgotten objects, etc.).
Switch o the lawn mower robot in safety conditions (See
Par. 1.4). Remove the obstacles and restart the robot
lawn mower.
Electric motor failure Replace the motor, contact the nearest authorized service
centre.
Grass too tall Increase the cutting height (See Par. 3.5).
First mow the area with a normal lawnmower
The robot lawn mower does not
position itself properly inside the
charging station.
Incorrect position of the perimeter cable. Check the connection of the charging station (see Par. 2.3.2).
Ground next to the recharging base has collapsed Restore the correct positioning of the charging base.
(See Par. 2.3.2).
The mower robot behaves
abnormally around perimeter
obstacles.
Perimeter cable laid in the wrong way Reposition the perimeter cable correctly (clockwise)
(see Par. 2.3.1).
The charging base light does not
turn on when the robot is out of the
charging base.
The supply voltage is missing or there is a fault
in the charging base.
Check that the power supply unit is plugged in correctly.
Check the integrity of the power supply connection cable.
The charging base light turns on
slowly
The perimeter cable is not connected or is broken Check the installation and repair the break (see Par. 2.3)
The charging base light turns on with
quick ashing
the perimeter cable is too short or there is a fault
in the charging base.
Check that the length of the perimeter cable is greater than
indicated in the Par. 2.3.2. If the problem persists, contact
a service centre.
The warning icon is on on the
keyboard
It indicates anomaly / failure conditions. For more information consult the app or refer to the Smart
User Manual
4. Lift the robot lawn mower by its handle (Fig. 15.D) and
carry it, making sure to keep the cutting blade away from
the body.
5.2. STORAGE
The robot lawn mower must be stored in a dry and frost-free
place after cleaning and charging the battery in the winter
(see Chap. 4).
5.3. DISPOSAL
CAUTION:
    

1. Dispose of the product packaging in a sustainable way in
the appropriate collection containers or at special centres
authorized for collection.
2. Dispose of the robot lawn mower in accordance with local
legal requirements.
3. Contact appropriate facilities for recycling and disposal
as the robot lawn mower is classied as WEEE (Waste
Electrical and Electronic Equipment).
4. Dispose of old or used batteries in a sustainable way in
collection containers or at authorized collection centres.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Stiga G300 and is the answer not in the manual?

Stiga G300 Specifications

General IconGeneral
BrandStiga
ModelG300
CategoryLawn Mower
LanguageEnglish

Related product manuals