Stiga SHP 60 User Manual

2 IDENTIFICATION OF MAIN COMPONENTS
EN
1. Engine
2. Cutting device (blade)
3. Cutter protection plate
4. Front handgrip
5. Rear handgrip
6. Rear handgrip release
command
7. Blade protection
10. Registration plate
CONTROLS
AND FILLING POINTS
11. Engine stop switch
12. Blade command
(Accelerator lever)
13. Accelerator safety
lever
14. Starter
15. Choke
16. Primer
21. Fuel tank cap
22. Air cleaner cover
1. IDENTIFICATION OF MAIN COMPONENTS
REGISTRATION PLATE
10.1) Mark of conformity
10.2) Name and address of the manufacturer
10.3) Acoustic output level
10.4) Type of machine
10.6) Serial number
10.8) Year of manufacture
10.9) Article Code
10.10) Emission number
The example of the declaration of conformity can
be found on the last pages of the manual.
10.4
10.1
10.8
10.2
10.9 10.6
10.10
Art.N.
WA
L
dB
WA
L
10.3

Stiga SHP 60 Specifications

General

Blade size	610 mm
Blade type	Double blade
Noise level	109 dB
Product color	Black, Yellow
Cutting length	550 mm
Blade tooth spacing	27 mm
No-load stroke rate	9500 spm
Fuel tank capacity	0.41 L
Engine displacement	24.5 cm³
Engine number of strokes	2
Power source	Gasoline

Weight and Dimensions

Weight	5500 g
Package depth	1110 mm
Package width	240 mm
Package height	265 mm
Package weight	7500 g