42 EN
4. OPERATION
4. OPERATION
Requirements and obligations:
• Installation performed according to
the instructions (see Chap. 3)
• Programming the robot lawn mower
according to the instructions (see Par.3.7 for
automatic operation)
• Powered charging base • Initial grass height in the range of operation
of the robot lawn mower: 20-60 mm
• Charged battery (see Par. 4.4) • Properly adjusted cutting height
(see Par. 4.6)
4.1. CHECK OF SAFETY DEVICES FOR STARTING THE ROBOT LAWN MOWER
Requirements and obligations:
• Safety key.
Procedure:
1. Check that the oating cover (A) is tted correctly. If the cover is missing the robot lawn mower doesn't
work.
2. Check that the safety key (E) is inserted If it is not inserted the robot lawn mower doesn't start.
3. Check that the stop button “STOP" (B) is not active. If pressed, it stops the robot lawn mower and
opens the protective cover (C) of the control console (D).
4. Check that the robot lawn mower is positioned on the ground correctly. In case of excessive tilt (≥ 45%)
or lift, the tilt sensors (inclinometer) stop the robot lawn mower.
A
D
EB C
To Next Page
Loading...
Need help?
General
