Stiga stig User Manual

57EN
6. TROUBLESHOOTING
6. TROUBLESHOOTING
CAUTION:
Stop the robot lawn mower and bring it back to safety conditions (see Par. 4.3.2).
Below there is the list of any anomalies that may arise during the work phase.
PROBLEM CAUSES SOLUTIONS
Abnormal vibrations.
The robot lawn mower
is noisy.
Damaged cutting disc or blades Replace the damaged components
(see Par. 5.3).
Cutting device blocked by
residues (tapes, ropes, plastic
fragments, etc.).
Switch o the robot lawn mower in safety
conditions (see Par. 1.3). Unlock the cutting
blade.
The robot lawn mower was started
in the presence of unexpected
obstacles (fallen branches,
forgotten objects, etc.).
Switch o the robot lawn mower in
safety conditions (see Par. 1.3). Remove
obstacles and restart the robot lawn mower
(see Par. 4.3.9).
Electric motor failure. Replace the motor, contact the nearest
authorized service centre.
Grass too tall. Increase the cutting height (see Par. 4.6).
Make a preliminary cut of the area with a
normal lawn mower (see Par. 4.4).
The robot lawn mower
does not position itself
properly inside the
charging station.
Incorrect position of the perimeter
cable.
Check the connection of the charging
station (see Par. 3.5.1).
Ground next to the recharging
base has collapsed.
Restore the correct positioning of the
charging base. (See Par. 3.5.3).
The mower robot
behaves abnormally
around perimeter
obstacles.
Perimeter cable laid in the wrong
way.
Reposition the perimeter cable correctly
(clockwise) (see Par. 3.5.1).
The robot lawn mower
works at the wrong
times.
Clock set in the wrong way. Reset the robot lawn mower clock
(see Par. 3.7.6).
Working time set incorrectly. Reset the working time (see Par. 3.7.8).

Stiga stig Specifications

General

Brand	Stiga
Model	stig
Category	Lawn Mower
Language	English