EN - 17
6.1.5 Positioning the anti-scalping wheels
6.2
those outlined on the tables.
Always carry out the safety
checks before use.
6.2.1 General safety check
Result
Rear discharge guard,
grass catcher
Good condition. No
installed.
Side discharge
guard, suction grid
Good condition. No
installed
Fuel lines and
connections.
Electrical cables. All insulation intact.
Oil lines
Proceed as indicated
in par. 6.2.2
6.2.2
A.
B.
Action Result
1.
2. cutting device
operator seated.
The engine starts
the operator leaves his seat The engine stops
Action Result
the grass catcher is lifted
or the rear discharge
disengaging the cutting
device (for rear collection
models only)
The engine stops
the cutting device
The engine stops
the speed change is
activated or the drive
The engine stops
the reverse gear is
pressing the consent
The engine stops
neutral /release the drive
pedal
Test driving
vibrations.
If any of the results fail to match the
indications provided in the tables, do not
use the machine! Contact a service centre to
have it checked and repaired if necessary.
Always bear in mind that
the safety devices prevent the engine from
starting if safety requirements have not
been met. In these cases, once the start
consent has been reinstated, the ignition
key (g. 15.A) must rst be turned back to
O before the engine can be restarted.
6.3 USING ON SLOPES
particular care. To prevent overturning
•
obstacles (such as stones, branches, roots,