27
30
28
29
(ill.
27).
Next, align the saw
in
the direction
in
which the
recess is to be cut.
With the saw at full throttle, insert the guide bar
in
the
trunk (ill. 28).
Enlarge the plunge cut as shown
in
illustration (ill. 29).
arnlng!
There
is
an
extreme danger of kickback at this point.
Extra caution must be taken to maintain control of the saw.
To
make the felling cut, follow the sectioning method
described previously (ill. 30).
If you are inexperienced with a chain saw plunge-cutting
should not be attempted. Seek the
~Ip
of a professional.
Limbing
Limbing is removing the branches from a fallen tree.
Warnlngl
There
is
an
extreme danger of kickback during the limbing
operation. Do not work with the nose of the
bar.
Be
extre-
mely cautious and avoid contacting the log or other limbs
with the nose of the guide
bar.
Do not stand
on
a log while limbing it - you may slip or the
log may roll.
17
To Next Page
Loading...
Need help?
General
