34
blowdown area, ill. 36). Working
in
blowdown areas
is
extremely hazardous.
7.
Drag the logs into a clear area before cutting. Pull out
exposed and cleared logs first.
Maintenance
and
Repair
Never operate a chain saw that is damaged, improperly
adjusted
or
not completely
or
securely assembled. Follow
the maintenance and repair instructions in the appropriate
section of your Owner's Manual.
-""
-
2.
Cross cut
Warning!
Always stop the engine and make sure that the chain is
stopped before doing any maintenance or repair work
or
cleaning the saw.
Do
not attempt any maintenance or
repair work not described
in
your Owner's Manual. Have
such work performed at your STIHL service shop only.
MAINTAINING AND STORINGTHE SAW
35
Keep the chain, bar and sprocket clean and lubricated;
replace worn sprockets or chains.
Keep the chain sharp.
You
can spot a dull chain when
easy-to-cut wood becomes hard to cut and burn marks
appear on the wood.
Keep the chain at proper tension. Tighten all nuts, bolts
and screws except the carburetor adjustment screws after
each use.
Keep spark plugs and wire connections tight and clean.
Store saws in a high or locked place, away from children.
19
To Next Page
Loading...
Need help?
General
