To Next PageTo Next PageTo Previous PageTo Previous Page
Loading...How to fix a Stihl ASA 85 if the cut is not clean?
If the cut is not clean when using your Stihl power tool, the cutting blade may be dull and needs sharpening. Alternatively, there could be too much play between the cutting and anvil blades, requiring adjustment. In some cases, the cutting blade may be worn or damaged and needs replacement.
Why is the Stihl Power Tool pruning shear runtime too short?
The runtime of your Stihl power tool pruning shears might be too short due to several reasons. The battery may not be fully charged, so recharge it. The battery life may be exceeded, consider replacing it. A dull cutting blade can also reduce runtime, so sharpen the cutting blade. Additionally, there might be too much play between the cutting and anvil blades, which requires adjustment. Insufficient grease between the cutting and anvil blades can also cause this, so lubricate them with a grease gun.
General| Brand | Stihl |
|---|---|
| Model | ASA 85 |
| Category | Power Tool |
| Language | English |
Information on how to use the manual and understand symbols and warnings.
Essential safety rules and warnings for operating the cordless pruning shears and handling the backpack.
Instructions on how to hold, control, and effectively use the cordless pruning shears.
Steps for connecting the charger, charging the battery, and understanding LED indicators on the battery and charger.
Guide to assembling the pruning shears, fitting the backpack, and connecting all components correctly.
Procedures for initial setup, fitting the battery, and safely turning on the cordless pruning shears.
Details on using the controller, navigating menus, and interpreting status displays and battery charge levels.
Guidance on releasing cutting blade blockages and adjusting the cutting blade opening angle and action.
Procedures for safely switching off the tool for breaks and engaging standby mode.
Comprehensive guide to maintaining the tool, including cleaning, lubrication, and parts replacement intervals.
Technical specifications of the tool, including battery, dimensions, and guidelines for proper product disposal.
Steps to diagnose and resolve common problems and malfunctions with the pruning shears.
