6
English
BT 360
During Operation
Warning!
Your power drill produces
toxic exhaust fumes as
soon as the engine is
running. These fumes
may be colorless and
odorless. Never run the engine indoors
or in poorly ventilated locations.
To reduce the risk of serious or fatal
injury from breathing toxic fumes,
ensure proper ventilation when working
in trenches, hollows or other confined
locations.
To reduce risk of fire,
do not smoke while
operating or standing
near your power drill.
Note that combustible fuel vapor may
escape from the fuel system.
The machine is operated by two
persons. They must hold the handle
frame firmly with both hands.
Fingers and thumbs must be wrapped
tightly around the handles – thumbs
downwards – both operators must have
a firm and safe footing at all times.
Good and clear communications
between the operators reduces the risk
of injury. Instructions and directions may
be given only by the person who is
controlling the throttle lever.
Do not touch a hot muffler – operate the
machine only with the muffler guard
securely mounted in position.
Operate the machine so that it produces
a minimum of noise and emissions – do
not run engine unnecessarily, accelerate
the engine only for drilling.
Make sure that the idle speed is properly
adjusted: The drilling tool must stop
rotating, after a brief delay, when you
move the throttle lever to the idle
position.
Check idle speed adjustment regularly. If
the drilling tool rotates, have the
machine checked by your STIHL dealer.
Do not allow any other persons in the
work area. Keep a sufficiently safe
distance away from other persons to
protect them from noise and thrown
debris.
Take special care in slippery conditions
– damp, snow, ice, on slopes and
uneven ground.
Work calmly and carefully – in daylight
conditions and only when visibility is
good – ensure you do not endanger
others – stay alert at all times.
441BA006 KN
To Next Page
Loading...
Need help?
General
