19 Maintenance and Repairs
Users of this machine may only carry out the
maintenance and service work described in this
user manual. All other repairs must be carried
out by a servicing dealer.
STIHL recommends that you have servicing and
repair work carried out exclusively by an author‐
ized STIHL servicing dealer. STIHL dealers are
regularly given the opportunity to attend training
courses and are supplied with the necessary
technical information.
When repairing the machine, only use replace‐
ment parts which have been approved by STIHL
for this power tool or are technically identical.
Only use high-quality replacement parts in order
to avoid the risk of accidents and damage to the
machine.
STIHL recommends the use of original STIHL
replacement parts.
Original STIHL parts can be identified by the
STIHL part number, the { logo and the
STIHL parts symbol K (the symbol may appear
alone on small parts).
20 Disposal
Contact the local authorities or your STIHL serv‐
icing dealer for information on disposal.
Improper disposal can be harmful to health and
pollute the environment.
► Take STIHL products including packaging to a
suitable collection point for recycling in accord‐
ance with local regulations.
► Do not dispose with domestic waste.
21 EC Declaration of Con‐
formity
ANDREAS STIHL AG & Co. KG
Badstr. 115
D-71336 Waiblingen
Germany
declares under our sole responsibility that
Designation: KombiTool edger
Make: STIHL
Series: FCB-KM
Serial identification num‐
ber:
4180
conforms to the relevant provisions of Directive
2006/42/EC and has been developed and manu‐
factured in compliance with the following stand‐
ards in the versions valid on the date of produc‐
tion:
EN ISO 12100 (in conjunction with the specified
KM and FR models).
EN ISO 12100, EN 60335-1, EN 50636-2-92 (in
conjunction with the specified KMA tools).
Technical documents deposited at:
ANDREAS STIHL AG & Co. KG
Produktzulassung
The year of manufacture is specified on the
power tool.
Waiblingen, 2022-09-19
ANDREAS STIHL AG & Co. KG
pp
Robert Olma, Vice President, Regulatory Affairs
& Global Governmental Relations
22 UKCA Declaration of Con‐
formity
ANDREAS STIHL AG & Co. KG
Badstr. 115
D-71336 Waiblingen
Germany
declares under our sole responsibility that
Designation: KombiTool edger
Make: STIHL
Series: FCB-KM
Serial identification num‐
ber:
4180
conforms to the relevant provisions of the UK
Supply of Machinery (Safety) Regulations 2008
and has been manufactured in compliance with
the following standards in the versions valid on
the date of production:
EN ISO 12100 (in conjunction with the specified
KM and FR models).
English 19 Maintenance and Repairs
16 0458-471-0121-C
To Next Page
Loading...
Need help?
General
