3.8 Cutting attachments and
deflectors
The arrow on the deflector shows the direction of
rotation of the blade – see "Use".
Operate the edger only the skirt attached to the
deflector – see "Replacing the skirt".
Handle the blade correctly – see "Use".
Optimum cutting performance: at full throttle and
with uniform feed.
STIHL recommends the use of genuine STIHL
blades – see "Special accessories".
Only use deflectors or attachments which have
been approved by STIHL for this machine or
which are technically equivalent.
4 Using the Unit
Your power edger is designed to produce sharp
contoured borders around lawns and flower
beds. It will cut almost all types of grass, weeds
and soft green plants.
4.1 Preparations
If the work area is very dry, spray it lightly with
water: this softens the soil and ensures that less
dust is created. Slightly damp green plants are
easier to cut.
WARNING
Clear away all obstacles and solid objects from
the work area.
► Plan the best route for edging. Always hold
and operate your edger on the right-hand side
of your body.
4.2 Adjusting Depth of Cut
► Shut down the engine.
► Loosen the wingnut (1) counterclockwise.
► Push wheel (2) upwards to increase the depth
of cut (A) or downwards to reduce the depth of
cut (A).
English 4 Using the Unit
6 0458-471-0121-C
To Next Page
Loading...
Need help?
General
