Stihl FR 450 User Manual

5/20/2018
STIHL FS 350 Service manual.pdf - slidepdf.com
http://slidepdf.com/reader/full/stihl-fs-350-service-manualpdf 35/63
- Remove the throttle trigger - see
7.1.
•
Lift contact spring (1) a little and
remove the throttle cable (2).
•
Remove spring from seats (1)
and peg (2).
•
Remove contact spring from peg
(1) and collar screw (2).
•
Take out slide control’s collar
screw (1).
•
Remove detent spring (2).
•
Pull slide control out of handle
molding.
Assemble in the reverse
sequence.
- Engage contact spring correctly
in groove of collar screw.
FR 350/450
•
Use screwdriver (1) 5910 890
2301 to remove screw.
•
Push guard (2) forward.
All models
Warning:To avoid risk of electric
shock, do not start the unit while
the control handle is open.
•
Use screwdriver (1) 5910 890
2301 to take out the screws.
- Remove handle molding.
•
Remove torsion spring.
7.2 Contact Springs/Detent Spring in Control Handle 7.3 Throttle Trigger/Interlock
(Bike Handle) Lever (Loop Handle)
34 FS 120, 200, 300, 350, 400, 450, FR 350, 450

Stihl FR 450 Specifications

General

Brand	Stihl
Model	FR 450
Category	Brush Cutter
Language	English