FSA 90 R
English
24
N Move the retaining latch to ƒ.
N Remove the battery.
N Thoroughly clean the machine.
N Store the machine in a dry and
secure location out of the reach of
children and other unauthorized
persons.
Cover for Battery Compartment
In some markets the machine comes
with a cover for the battery
compartment. It protects the battery
compartment from contamination.
N After finishing work, slide the
cover (1) home until it engages
audibly in position.
Storing the Battery
N Take the battery out of the power
tool or the charger.
N Store indoors in a dry and safe
location. Keep out of the reach of
children and other unauthorized
persons and protected from
contamination.
N Do not store spare batteries unused
– use in rotation.
To optimize the life of the battery, store
it at a state of charge of about 30%.
Storing the Charger
N Remove the battery.
N Disconnect the plug from the wall
outlet.
N Store the charger indoors in a dry
and secure location. Keep out of the
reach of children and other
unauthorized persons and
protected from contamination.
Placing Power Tool on the Ground
N Move the retaining latch to ƒ and
remove the battery.
N Position your power tool so that the
cutting attachment mounting face is
pointing up.
Replacing Nylon Line
Always check the mowing head for signs
of wear before replacing the nylon line.
WARNING
If there are signs of serious wear,
replace the complete mowing head.
The nylon mowing line is referred to as
"nylon line" or "line" in the following.
The mowing head is supplied with
illustrated instructions for replacing the
nylon line. Keep the instructions for the
mowing head in a safe place.
N If necessary, remove the mowing
head.
Storing the Machine
Maintaining the Mowing
Head
To Next Page
Need help?
General
Weight and Dimensions
