EasyManuals Logo
Home>Stihl>Paper Shredder>GHE 355

Stihl GHE 355 User Manual

Stihl GHE 355
34 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #31 background imageLoading...
Page #31 background image
EN
29
0478 201 8314 C - EN
By disposing of materials separately, and
in an environmentally friendly manner,
valuable resources can be re-used. For
this reason, the machine should be
disposed of for recycling at the end of its
useful life.
15.1 Disposal
Render the machine unusable prior to
disposal.
In particular, remove the power cable and
electric cable to the motor for this purpose.
Risk of injury from the blades.
Always store an old garden shredder in a
safe place prior to scrapping. Make sure
that the machine and the blades are kept
out of the reach of children.
* Caution!
In the case of mains fuses of less than
15 A, these may be tripped during start-
up or in the case of high load operation
of the machine.
Fault:
Motor not starting
Possible cause:
Motor overload protection activated
–No mains voltage
Electric cable/plug and plug connector
or switch defective
Feed chute not properly closed – safety
cut-off switch activated (safety
interlock)
Blocked blade disc
Locking device not reset
Remedy:
Allow machine to cool down (Ö 8.8),
(Ö 10.6)
Check power cable and fuse
# (Ö 10.1)
Check cable, plugs, connector and
switch and replace if necessary (by
electrician) # (Ö 10.1)
Close feed chute properly and tighten
screws (Ö 11.3)
Remove feed chute and remove
shredder deposits from housing
(important: detach power cable)
(Ö 11.4)
Reset locking device (Ö 11.7)
Fault:
Reduced shredding performance
Possible cause:
Blunt blades
Incorrectly ground blades
16. Technical specifications
Serial number 6011
Motor, design Electric motor
Voltage 230 V~
Power input 2200 W
Main fuse* 10 A
Frequency 50 Hz
Operating conditions P40
40 s load time
60 s idle time
Protection class I
Type of protection Splash proof
(IPX4)
In accordance with
Directive
2000/14/EC:
Guaranteed sound
power level L
WAd
100 dB(A)
Wheel diameter 250 mm
Maximum branch
diameter 35 mm
Nominal motor speed 2780 rpm
In accordance with
Directive
2006/42/EC:
Sound pressure level
at workplace L
pA
94 dB(A)
Uncertainty K
pA
3dB(A)
Weight 31 kg
L/W/H 122/50/141
17. Troubleshooting
# If necessary, contact a specialist
dealer; STIHL recommends STIHL
specialist dealers.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Stihl GHE 355 and is the answer not in the manual?

Stihl GHE 355 Specifications

General IconGeneral
Power2500 W
Product colorBlack, Orange, White
Uncertainty K2.4 dB
Cutting systemBlade
AC input voltage230 V
Transport wheelsYes
Rated speed (max)2750 RPM
Sound power level100 dB
Material throughput- kg/h
Sound pressure level94 dB
Collection box capacity- L
Maximum branch thickness35 mm
Weight and Dimensions IconWeight and Dimensions
Weight30000 g

Related product manuals