Stihl HL 95 User Manual

HL 95, HL 95 K, HL 100, HL 100 K
English
8
Cutting Season
Observe country-specific or municipal
rules and regulations for cutting hedges.
Do not use your hedge trimmer during
rest periods customary in the
neighborhood.
Cutting Sequence
If a radical cut is necessary, cut a little at
a time in several stages.
Use lopping shears to cut out thick
branches first.
Cut the sides of the hedge first, then the
top.
Disposal
Do not throw cuttings into the garbage
can – they can be composted.
Preparations
N Adjustable gearbox: Set cutter bar
to required angle.
N Remove the blade scabbard.
N Start the engine.
N If you use a harness: Put on the
harness and attach it to the
machine.
Working Technique
Horizontal Cut (with cutter bar at an
angle)
Cutting close to the ground from a
standing position, e.g. low shrubs.
Swing the cutter bar back and forth in an
arc as you move along – use both sides
of the cutting blades.
WARNING
K versions (HL 95 K / HL 100 K) are not
approved for cutting close to the ground.
Vertical Cut (with cutter bar at an angle)
Cutting without standing directly next to
the hedge, e.g. flowerbed between
operator and hedge.
Swing the cutter bar up and down in an
arc as you move along the hedge – use
both sides of the cutting blades.
Using the Unit
388BA029 KN
388BA030 KN

Stihl HL 95 Specifications

General

Brand	Stihl
Model	HL 95
Category	Pole Saw
Language	English