HL 95, HL 95 K, HL 100, HL 100 K
English
16
Some versions of the machine can be
carried on a harness.
The type and style of the harness
depend on the market.
Shoulder strap
N Put on the shoulder strap (1).
N Adjust the length of the strap.
N With the power tool attached, the
carabiner (3) must be at about the
same height as your right hip.
Full harness
N Put on the full harness (2).
N Adjust the length of the strap.
N With the power tool attached, the
carabiner (3) must be at about the
same height as your right hip.
Controls
1 Throttle trigger lockout
2 Throttle trigger
3 Slide control
Positions of slide control
4STOP-0 – engine off – the ignition is
switched off
5 F – normal run position – the engine
is running or can start
6START – ignition is switched on –
the engine can start
Fitting the Harness
To Next Page
Loading...
Need help?
General
