HL-KM
English
14
NOTICE
Do not completely fill the gearbox with
grease.
N Unscrew the tube of grease from the
filler hole.
N Refit the filler plug and tighten it
down firmly.
For periods of about 3 months or longer
N Clean the cutting blades, check
condition and spray them with
STIHL resin solvent.
N Fit the blade scabbard.
N If the KombiTool is removed from
the KombiEngine and stored
separately: Fit the protective cap on
the drive tube to protect it from dust
and dirt.
N Store the machine in a dry and
secure location Keep out of the
reach of children and other
unauthorized persons.
The following intervals apply to normal
operating conditions only. If your daily
working time is longer or operating
conditions are difficult (very dusty work
area, etc.), shorten the specified
intervals accordingly.
All accessible screws and nuts
N Check and retighten if necessary
(not screws and nuts on cutting
blades)
Cutting blades
N Visual inspection before starting
work
N Resharpen as necessary
N Replace if damaged
Gearbox lubrication
N Check before starting work
N Replenish as necessary
Safety labels
N Replace illegible safety labels
Storing the Machine Maintenance and Care
To Next Page
Loading...
Need help?
General
