29KM 110, KM 130
English / USA
1) STIHL recommends the STIHL
dealer
* see “Guide to Using this Manual“
Maintenance Chart
Please note that the following maintenance intervals apply for normal operating
conditions. If your daily working time is longer than normal or cutting conditions
are difficult (very dusty work area etc.), shorten the specified intervals accordingly
before
starting work
after finishing
work or daily
after each
refueling stop
weekly
monthly
every 12 months
if problem
if damaged
as required
Complete machine
Visual inspection (condition, leaks)
XX
Clean
X
Control handle Check operation
XX
Air filter
Clean
XX
Replace
X
Pick-up body in fuel tank
Have checked by dealer
1)
X
Have replaced by dealer
1)
XXX
Fuel tank Clean
XX
Carburetor
Check idle adjustment - tool must not
move
XX
Readjust idle
X
Spark plug
Readjust electrode gap
X
Replace after about 100 operating
hours
Cooling inlets
Inspect
X
Clean
X
Valve clearance
Check, readjust if necessary, after first
139 hours of operation
X
Combustion chamber
Decarbonize after first 139 hours of
operation, then every 150 hours of
operation
X
Spark arresting screen* in muffler
Inspect
XX
Replace
XX
All accessible screws and nuts
(not adjusting screws)
Retighten
X
Anti-vibration element
Check
XX
Have replaced by dealer
1)
X
Safety labels replace
X
To Next Page
Loading...
Need help?
General
