Stihl HT 103 User Manual

HT 102, HT 103, HT 132, HT 133
English
27
N Adjust the hip belt (3), both shoulder
straps (4) and the carrying strap (5).
N Squeeze the clip together to move it
up or down the shaft.
Controls
1 Throttle trigger lockout
2 Throttle trigger
3 Stop switch with Run and Stop
positions. Depress the stop switch
(…) to switch off the ignition – see
"Function of stop switch and ignition
system".
Function of stop switch and ignition
system
The ignition is switched off and the
engine stopped when the stop switch is
pressed. The stop switch returns
automatically to the Run position when it
is released: The ignition is switched on
again after the engine stops – the engine
is then ready to start.
Starting the Engine
N Press the manual fuel pump
bulb (9) at least five times – even if
the bulb is already filled with fuel.
N Press in the choke lever (8) and turn
it to the position that suits the engine
temperature:
4
5
3
0000-GXX-1574-A0
0000-GXX-1575-A0
Starting / Stopping the
Engine
2
1
3
0000-GXX-0477-A0
g if the engine is cold
< for warm start – also use this posi-
tion if the engine has been running
but is still cold.
0000-GXX-0478-A0

Stihl HT 103 Specifications

General

Brand	Stihl
Model	HT 103
Category	Pole Saw
Language	English