14
english / USA
KW 85
Before fueling, clean the filler cap and
the area around it to ensure that no dirt
falls into the tank.
Always thoroughly shake the mixture in
the canister before fueling your
machine.
In order to reduce the risk of burns
or other personal injury from
escaping gas vapor and fumes,
remove the fuel filler cap carefully
so as to allow any pressure build-up
in the tank to release slowly.
After fueling, tighten fuel cap as
securely as possible by hand.
Change the fuel pick up body every
year.
: Before storing your machine for a
long period, drain and clean the fuel
tank and run engine until carburetor
is dry.
: Attach the spring hook (1) to the
clamp (2).
* see “Guide to Using this Manual”
Fueling
389BA031 KN
389BA032 KN
Attaching Machine to
Harness*
11
280BA011 KN
2
2
To Next Page
Loading...
Need help?
General
