MSE 170 C, MSE 210 C
English
26
N Depress the trigger switch
lockout (1) with your thumb.
N Squeeze the trigger switch (2) with
your index finger.
N Start the cut with the chain running.
The motor runs only if the hand guard is
on ‚ and the trigger switch lockout (1)
and trigger switch (2) are operated
simultaneously.
N Release the trigger switch (2) so
that it can return to the off position.
It is locked in this position by the
trigger switch lockout (1).
The coasting brake brings the chain to a
standstill.
WARNING
The coasting brake operates
immediately only if the trigger switch is
fully released. If you release the trigger
switch slowly or only partly, the saw
chain will continue to run for several
seconds.
N Move hand guard to ƒ – the chain
is locked.
During longer work breaks – disconnect
the plug from the wall outlet.
When the machine is not in use, store it
in such a way that it does not endanger
others.
Secure it against unauthorized use.
To Next Page
Loading...
Need help?
General
