RB 800
English
20
Maintenance and Care
Before performing any inspection, maintenance, cleaning or other work on the machine, shut off the engine, turn off the water
supply and squeeze the spray gun trigger until the pressure in the system has been fully released.
The information applies in normal operating conditions. The specified intervals
must be shortened accordingly for longer daily working hours. If the machine is
only used occasionally, the intervals can be extended accordingly.
NOTE: Kohler recommends that engine oil be changed after the first 5 hours of
operation.
Before starting work
At the end of work and/or
daily
Weekly or every 40 operating
hours
After the first 5 operating
hours
Every 250 operating hours or
once a year
If damaged
As required
Entire pressure washer
Visual inspection (condition, leaks) X
Clean XX
Oil level of the high-pressure pump Check X
Oil of the high-pressure pump Change XX
Connectors on high-pressure hose
Clean XX
Grease X
Coupling on the spray lance and spray
gun
Clean XX
Water intake screen at inlet of high-pres-
sure pump
Clean XX
Replace X
High-pressure nozzle
Clean X
Replace X
Ventilation openings / cooling surfaces /
air intake ports
Clean XX
Injector in outlet of high-pressure pump Clean X
Rubber buffer on frame
Check X
Replace X
Engine Maintain Read and follow all maintenance and care instructions in the Kohler engine manual.
To Next Page
General
