Stihl RE 110 User Manual

0458-620-8221-A
19
English 8 Assembling the Pressure Washer
► Insert the coupling (1) of the high-pressure hose into the
high pressure connector (2).
► If the coupling is difficult to attach to the high-pressure
connector, grease the coupling or union nut with a food-
safe fitting grease.
8.3.2 Removing the High-Pressure Hose
WARNING
To reduce the risk of severe injury from high-pressure spray,
always switch off the pressure washer, shut off the water
supply, relieve any remaining pressure in the system and
lock the spray gun trigger before attempting to remove the
high-pressure hose from the pump or spray gun.
To remove the high-pressure hose:
► Switch off the pressure washer, @ 10.2.
► Disconnect the pressure washer from the power supply.
► Shut off the water supply.
► Pull the spray gun trigger to relieve pressure.
► Lock the spray gun trigger.
► Pull the coupling (1) off the high-pressure connector.
8.4 Connecting and Removing the Spray Gun and
Lance
8.4.1 Connecting the Spray Gun and Lance
To connect the spray gun and lance:
► Switch off the pressure washer, @ 10.2.
► Disconnect the pressure washer from the power supply.
► Shut off the water supply.
► Lock the spray gun trigger.
► Remove all sand and debris from the connections and
couplings.
► Push the high-pressure hose (1) into the spray gun (2).
1
0000-GXX-7813-A0
2
1
0000-GXX-7814-A0
2
0000-GXX-4348-A0
1

Stihl RE 110 Specifications

General

Form factor	Upright
Hose length	7 m
Cable length	5 m
Power source	Electric
Product color	Black, Orange
Pump material	Aluminum
Detergent tank	-
Maximum flow rate	440 l/h
Minimum flow rate	380 l/h
Sound power level	81 dB
Vibration emission	1.8 m/s²
Working pressure (max)	120 bar
Working pressure (min)	110 bar
Maximum water temperature	40 °C
AC input voltage	230 V
Power consumption (typical)	- W

Weight and Dimensions

Weight	17600 g