0458-620-8221-A
36
English
17 Troubleshooting Guide
The nozzle is worn. ► Insert a new nozzle.
Detergent is not being drawn
in.
The detergent container is empty. ► Fill the container with detergent.
The nozzle of the detergent spray set is
blocked.
► Clean nozzle of the detergent spray set.
The connections of the
pressure washer, high-
pressure hose, spray gun or
spray lance are stiff.
The gaskets of the connections have not
been greased.
► Grease the gaskets. @ 16.3
Before troubleshooting, switch off the pressure washer and disconnect the unit from the power supply. Relieve all system
pressure by pulling the trigger switch. Lock the spray gun trigger.
Condition Possible Cause Remedy